Your cart is empty

DJI NAZA-M V2 Flight Controller + GPS V2 + PMU + LED Full Combo

DJI NAZA-M V2 Flight Controller + GPS V2 + PMU + LED Full Combo
larger image
Price: $399.00  $312.00
Save: 22% off

What乫s new with the NAZA-M V2 :   

  • New attitude stabilization algorithm, provides better flight performance / maneuverability  
  • New flight control performance, provides better flight experience; (flight control is smoother, take乚off is easier)  
  • Support for Octo乚rotor
  • One乚motor stopped still can land safely (Hexa乚rotor, Octo乚rotor)
  • Automatic course deviation compensation, reduced the effects of magnetic disturbance; interference around the compass detection & warning
  • Added IMU advanced calibration, error identification and warning, reduced the impact of sensor error to the flight performance

Please note existing Naza V1 owners will be able to upgrade to V2 features   with a New PMU that will be available as a Upgrade.
DJI has continued improving the Naza Flight Controller, the latest is the Naza M V2 which is the   next exciting product to the market with the latest technology being integrated  in to the new NAZA M V2. The basic functionality will remain the same as DJI   NAZA V1, however there are a few new features.
The main controller hardware structure has been optimized and the expandability and performance of the flight control system has been enhanced further with new   attitude stabilization algorithms, these provide better flight performance / manoeuvrability and a new level of flight control performance which provides a better flight experience; (flight control is smoother, take-off is easier). The Naza M V2 has support for OctoCopter and has the added safety feature on HexaCopter and OctoCopter should a motor stop working it can still be landed safely.

The Naza M V2 has automatic course deviation compensation, this reduces the effects of magnetic   disturbance and interference around the compass, there is a warning on detection of magnetic disturbance. The IMU advanced calibration; error identification and   warning reduce the impact of sensor errors in flight so increasing the overall performance.

The GPS unit added to the Naza M V2 will see great position holding and RTL features for additional safety. The V2 NAZA with the GPS unit will have IOC to help new and   experienced pilots gain the most from their systems with easy orientation assistance while flying at greater distances.    

Package Includes:
Naza-M V2 Flight Controller
Naza-m V2 GPS Module
Power Management Module
LED with USD interface
Cables

All-in-one Design            

DJI adheres to continuous innovation and improvement. With the new firmware, new attitude stabilization algorithm and optimized hardware structure, the Naza-M V2 provides better flight performance. The innovative All-in-one design simplifies installation and saves space and weight. It contains inner damping, controllers, 3-axis gyroscope, 3-axis accelerometer and barometer in its light and small Main Controller. It can measure flying altitude and attitude and therefore can be used for autopilot/automatic control.

Independent PMU with amazing function extension            

The Naza PMU V2 has enhanced BEC functionality and provides extendable CAN BUS ports, which can support iOSD, Zenmuse H3-2D gimbal (pitch control). Support is also included for optional Bluetooth LED module to allow parameter adjustment via a mobile APP (future firmware upgrade required for this functionality)

Advanced & Improved Attitude Stabilization Algorithm            

The latest fourth generation attitude stabilization algorithm not only inherits the outstanding flight stability of DJI products, but also provides excellent maneuverability even without the GPS module. It is more flexible and stable, and gives the hobbyists a wonderful flight experience. New features have been included such as GPS course automatic compensation, GPS & Compass sensor calibration, new take-off mode and so on.

Nine Types of Multi-rotors Supported            

Naza-M V2 now supports nine types of multi-rotor, which meets the different needs of the enthusiasts.
              Quad I, Quad X;
              Hexa I, Hexa V, Hexa Y, Hexa IY;
              Octo X, Octo I, Octo V; ( Naza-M V2 does not support the aircraft which has large vibration, so when you choose to use hexa-rotor or octo-rotor, please use the vibration dampening devices accordingly.

Multiple Flight Control Modes/Intelligent Switching            

It offers three types of control modes: GPS Atti. Mode (with GPS module), Atti. Mode, Manual Mode. The pilot can switch between the three modes to achieve different flight characteristics. It also can adjust automatically within the flight environment and intelligently switch between GPS Atti. Mode and Atti. Mode to make sure the flight is safe and secure. In the software at the position of the manual mode you can choose manual, attitude or failsafe; it supports one key failsafe trigger.

GPS Module Available/Accurate Position Hold            

The plug and play GPS module will greatly enhance the performance for Aerial Photography with accurate Position Hold, Return-To-Home and Intelligent Orientation Control functionalities. With the GPS Module, the multi-rotor will have position and altitude locked accurately even in windy conditions. Hovering accuracy is approximately 2.5m horizontal and 0.8m vertical.

Intelligent Orientation Control

           

Usually, the forward direction of a flying multi-rotor is the same as the nose direction. By using Intelligent Orientation Control (IOC), wherever the nose points, the forward direction has nothing to do with nose direction:
              In course lock flying, the forward direction is the same as a recorded nose direction. See the following figures(Mode 1)丗
             
              In home lock flying, the forward direction is the same as the direction from home point to multi-rotor. See the following figures (Mode 2)丗

Enhanced Failsafe Mode            

If your transmitter supports failsafe, then you can set failsafe through port-U. Naza controller has built-in auto level failsafe function, which means when the communication between MC and the transmitter is disconnected, the outputs of all command sticks from controller will go to center position. If the GPS module is used, you can also set RTH on failsafe. If your transmitter has only 4 channels, then MC will work in Atti. Mode by default without the failsafe function.

Two Levels of Low Voltage Protections            

In order to prevent your multi-rotor from crashing or other harmful consequences caused by low battery voltage, we have designed two levels of low voltage protection. You can choose not to use this, however we strongly recommend you to enable the protection. Both levels of protection have LED warning as default. The first level will blink the red light continuously; the second level will blink red light continuously and the multi-rotor will descend and land. In manual mode when low voltage protection is triggered the LED warning will be active only.

Motor Arm and Motor Dis-arm            

There are four ways to start the motors, see the following picture:
               
              When you want to start the multi-rotor, you need to perform any of the ways of CSC. During the flight, if the motors stop, you can immediately execute the CSC and the motors will start. This enhances the safety of the multi-rotor; no uncontrolled starting of the motors.
             
              Motor Disarm: There are two modes of Motor Disarm: namely Intelligent Mode and Immediate Mode. For more information, please refer to the user manual or DJI Wiki.
             
              Note: It has a brand new, smoother take-off algorithm, which is more stable and provides a brand-new experience in supporting double spring TX; every time you let go of the throttle stick it will hover.
           

                     

PPM, S-BUS & Ordinary Receiver Supported            

Minimum Four channel receiver supported, also PPM and Futaba S-Bus receiver supported. PPM & S-Bus receivers (the general use of the first 8 channels of S-Bus receiver) to optimize the channel connection, the A, E, T, R, U five-channel functions are set using channel X2, use only one servo cable to connect the PPM or S-Bus to X2, this makes installation quick and easy.

Independent LED Module

The Independent LED module makes the indication of the flight status and the system status to the ground much clearer. The pilot can get information more quickly and more conveniently, even at night, he/she can get real-time flight information feedback through the LED flashing frequency and colour. In addition, the module has a USB interface, which is used for parameter settings and firmware upgrade.

Built-in Gimbal Stabilization Function

The gimbal stabilization module is compatible with almost all 2-axis gimbal systems. The system will adjust the gimbal and camera according to the attitude of the aircraft after setting the parameters the first time.

Multi-rotor One-power Output Fail Protection

In most conditions, the whole multi-rotor will retain good attitude and rotate around the frame arm with no power output, due to imbalanced mechanical structure and external environment. Rotating is mainly caused by payload and external environment. When payload is heavier, rotating speed is faster. On rotating, the hexa-rotor physical structure can cause rudder to become out of control. This humanistic protection function from Naza-M V2, in Attitude or GPS Mode, keeps attitude under control even with any one power output failed and highly reduces crash risk.

Remote Gain Adjustment

The default parameter settings are preset for you to achieve a normal flight, and also supports remote parameter adjustment by using a control slider on the TX during flight in order to obtain better performance.

New Assistant Firmware Online Update

The user interface of the assistant software has been comprehensively updated and brings you a new interaction experience. Instructions will automatically appear which is very convenient. In addition, on the left side of each menu section there is additional information. The logical design makes your parameter settings more simple and convenient. Like other DJI products the Naza-M V2 firmware can be upgraded free online.


Add to Cart:

  • Model: DJI-NAZA-M-GPS-V2-COMBO
  • Shipping Weight: 0.2kg
  • 29 Units in Stock
  • Price: $399.00  $312.00
    Save: 22% off